| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hour Online Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ITEM | UNIT | JT-1160V | |
| Workbench | Workbench size | mm | 1240*610 |
| Worktable load-bearing capacity | kg | 1000 | |
| T-slot width (width x spacing x number of slots) | mm | 18*125*5 | |
| Trip | X-axis travel | mm | 1100 |
| Y-axis travel | mm | 650 | |
| Z-axis travel | mm | 650 | |
| Distance from spindle end face to workbench | mm | 120-770 | |
| Distance from spindle center to Z-axis rail surface | mm | 650 | |
| Principal axis | Speed range | rpm | 10000 |
| Main spindle power (continuous/30 minute rated) | kw | 11/15 | |
| Spindle torque(rated for continuous/15minutes) | Nm | 52.5/95.5 | |
| Slope of spindle inner hole | BT40 | ||
| Transmission mode | Direct-type | ||
| Feed | X-axis rapid displacement | m/min | 30 |
| Y-axis rapid displacement | m/min | 30 | |
| Z-axis rapid displacement | m/min | 30 | |
| Feed rate | mm/min | 15000 | |
| Automatic tool change system | Tool magazine capacity | set | 24 |
| Maximum tool outer diameter (when fully loaded) | mm | 80 | |
| Expanding the diameter of the hollow blade | mm | 150 | |
| Maximum tool length | mm | 300 | |
| Maximum tool weight | kg | 8 | |
| Tool change time (knife to knife) | sec | 24 | |
| Precision VD13441 (JISB6338) | Positioning accuracy | mm | P0.012(±0.004/300) |
| Repetitive accuracy | mm | Ps0.001(±0.003) | |
| Other | Electricity dernad | Kva | 25 |
| Barometric pressure demand (minimum) | kg/cm² | 6 | |
| Cuting fluid capacity | liter | 300 | |
| Machine footprint | mm(approximately) | 2900*2600 | |
| Machine height | mm(approximately) | 2830 | |
| Machine weight | kg(approximately) | 7500 | |
){kind=link}